Enamels

CHALLENGER PRO

TWO-COMPONENT POLYACRYLIC DIRECT GLOSS TOPCOAT

Challenger PRO is a polyacrylic two-component finish conceived to meet the duration requirements in the operational conditions of watercrafts. Challenger PRO protects the surface from ultraviolet rays, weather and provides an excellent aesthetical effect. Its excellent properties – brightness, expansion and lack of yellowing – together with its ease of application make possible to use it on any type of watercraft, including the large surfaces found in the Superyatch segment. Challenger Pro is available through the Challenger Mix tintometric system, that allows obtaining more than 200.000 colour shades.

COLOURS

2 l *4 l
See Colours card  
Composition
Component A   2 l
Component B
HARDENER PRO
  1 l  

*available also in 4 lt. packaging for order greater than 100 lt. to be defined with our Sales Dept.

Technical specifications

Theorical coverage 10 m²/l
2nd coat min/max 20' / 120' wet on wet (20°C)
Sanding 48 h (20°C)
Polishing48 a 20°C
Pot life 2 h (20°C)
Catalysys volume ratio 2:1
Catalysys volume ratio for spray -
Spray thinner and % dilution P698 | 20-45%             P697 | 20-45%

 

 

APPLICATION

Documents download

Boero Bartolomeo S.p.A.
Company subject to the Direction and Administration of CIN –
CORPORAÇÃO INDUSTRIAL DO NORTE, S.A.

Legal head office in Genova, Via Macaggi 19
VAT number 00267120103
© 2019 Boero - All rights reserved - Boero YachtCoatings Applicators Handbook